blue red pin_4 pin_3 pin_2 pin_1 green 0.65 0.026 0.80 0.031 0.80 0.031 0.30 0.012 0.30 0.012 0.20 0.008 pin_2 pin_1 pin_3 pin_4 1.10 0.20 1.10 0.20 electro-optical characteristic ta=25 absolute maximum ratings ta=25 *t<10us polarity recommended solder pad layout note: 1. rohs compliant. 2. compliance halogen free. parameter max units peak forward current (r/g/b)* 20/20/20 ma forward current (r/g/b) 10/10/10 ma power disipation (r/g/b) 24/31/31 mw storage temperature -40 to +90 operating temperature -40 to +85 parameter min typ max units test cond peak waelenght r - 625 - nm if=3ma g - 525 - if=5ma b - 465 - if=5ma forward voltage r - 2.0 2.4 vf if=3ma g - 2.9 3.2 if=5ma b - 2.9 3.2 if=5ma reverse voltage (r/g/b) - - 5 vr ir=10ua luminous intensity r 12 - 20 mcd if=3ma g 61 - 104 if=5ma b 9 - 25 if=5ma viewing angle - 120 - 2x theta1/2 - emitted color r/g/b epoxy lens finish clear lens (tinted) with textured finish top scale : mm [inch] date drawn by 425 n. gary ave. carol stream, il 60188 phone800-278-5666 fax630-315-2150 webwww.lumex.com 0.8(l)*0.8(w)*0.65(h)mm, surface mount led, alingap red/ingan green/ingan blue led, clear lens (tinted), tape & reel **the specifications may change at any time without notice due to new materials or product improvement.** confidential information the information contained in this document is the property of lumex inc. except as specifically authorized in writing by lumex inc., the holder of this document shall keep all information contained herein confidential and shall protect same in whole or in part from disclosure and dissemination to all third parties. chkd by aprvd by page unit *unless otherwise specified tolerances per decimal precision are: x= 1 ( 0.039), x.x= 0.5 ( 0.020), x.xx= 0.25 ( 0.010), x.xxx= 0.127 ( 0.005). lead size= 0.05 ( 0.002), lead length= 0.75 ( 0.030). min= max.= +decimal precision - 0.00 + 0.00 - decimal precision ntf pb part number rev SML-LX0303SIUPGUSB -- 2017.07.05 1 of 2 e.c. r.c. g.y.
temperature 3c / sec. max. 6c / sec. max. 260c above 217c 60~150 sec. 60~120 sec. 260c max 10sec. max 217c 200c 150c time 2.00 0.10 2.00 0.10 0.90 0.10 4.00 0.10 1.50 0.10 1.75 0.10 3.50 0.10 8.00 0.30 a a 0.91 0.10 0.75 0.10 0.20 0.10 section a-a profile carrier tape dimension pin_1 pin_4 pin_3 pin_2 scale : mm [inch] date drawn by 425 n. gary ave. carol stream, il 60188 phone800-278-5666 fax630-315-2150 webwww.lumex.com 0.8(l)*0.8(w)*0.65(h)mm, surface mount led, alingap red/ingan green/ingan blue led, clear lens (tinted), tape & reel **the specifications may change at any time without notice due to new materials or product improvement.** confidential information the information contained in this document is the property of lumex inc. except as specifically authorized in writing by lumex inc., the holder of this document shall keep all information contained herein confidential and shall protect same in whole or in part from disclosure and dissemination to all third parties. chkd by aprvd by page unit *unless otherwise specified tolerances per decimal precision are: x= 1 ( 0.039), x.x= 0.5 ( 0.020), x.xx= 0.25 ( 0.010), x.xxx= 0.127 ( 0.005). lead size= 0.05 ( 0.002), lead length= 0.75 ( 0.030). min= max.= +decimal precision - 0.00 + 0.00 - decimal precision ntf pb part number rev SML-LX0303SIUPGUSB -- 2017.07.05 2 of 2 e.c. g.y. r.c.
|
